علوم، فناوری و کاربردهای فضایی

علوم، فناوری و کاربردهای فضایی

مرور و تحلیل علم سنجی متون در حوزه موتور انفجار چرخشی

نوع مقاله : مقاله پژوهشی

نویسنده
دانشگاه صنعتی مالک اشتر مجتمع دانشگاهی مکانیک شاهین شهر ایران
چکیده
استفاده از انفجار به جای احتراق می‌تواند منجر به کاهش قابل توجه ابعاد و جرم محفظه پیشران شود. انفجار به شکل قابل ‌توجهی انرژی بیشتری در مقایسه با احتراق آزاد می‌کند که باعث رانش مؤثرتر شده و می‌تواند تحول جدیدی در صنعت هوافضا ایجاد کند. هدف این پژوهش توسعه دانش فناوری‌های برتر در حوزه پیشران‌های فضایی(توسعه مفهوم و طرز عملکرد) و بررسی وضعیت تولیدات علمی در حوزۀ فناوری موتور انفجاری چرخشی است. پژوهش حاضر از نوع کاربردی، داده کاوی و علم‌سنجی است و در انجام آن از تکنیک‌های تحلیل پایگاه‌های داده علمی استفاده شده است. داده‌ها و کلیدواژه‌های مرتبط با پژوهش در فاصله بین سال‌های 2010تا2024 با استفاده از پایگاه اطلاعاتی اسکوپوس جستجو و ارزیابی شدند. برای تحلیل داده‌ها و مصورسازی اطلاعات به دست آمده، از نرم‌افزار Vosviewer استفاده شده است. جامعه آماری پژوهش 895 مقاله در زمینه فناوری مرتبط و درگیر با موتور انفجاری چرخشی بوده است. تحلیل‌ها شامل، میزان فراوانی انتشار بر حسب سال، کشورهای بیشترین اسناد منتشر کننده، و تهیه نقشه فناوری‌ها و نقشه فناوری‌های نوظهور در این حوزه بوده است. نتایج بررسی نشان می‌دهد کلیدواژهای اصلی شامل طراحی محفظه احتراق، مدل‌سازی و شبیه‌سازی، مواد مقاوم به حرارت، و سیستم‌های تزریق سوخت  و کارایی بوده است. فراوانی و روند انتشار اسناد علمی در حوزه موتور انفجاری چرخشی به شدت سیر صعودی دارد، کشور چین و ایالات متحده بیشترین پژوهش‌ها و حمایت‌ها (بورسیه تحصیلی، دوره‌های مشترک، تجهیز زیرساخت و آزمایشگاه،...) را در این حوزه فناوری انجام داده‌اند.
کلیدواژه‌ها
موضوعات

[1]
G. A.Q. Abdulrahman , N. A.A. Qasem , B. Imteyaz, and A. M. Abdallah, "A review of aircraft subsonic and supersonic combustors," Aerospace Science and Technology, vol. 132, pp. 1-38, 2023..
[2]
T. Teasley, T. Fedotowsky, and P. Gradl, "Current State of NASA Continuously Rotating Detonation Cycle Engine Development," NASA Marshall Space Flight Cente, Huntsville, AL, 35808, 2021.
[3]
B. Ridgeway, "NASA’s 3D-printed Rotating Detonation Rocket Engine Test a Success," NASA, 2023. [Online]. Available: https://www.nasa.gov/centers-and-facilities/marshall/nasas-3d-printed-rotating-detonation-rocket-engine-test-a-success/.
[4]
K. Matsuoka, M. Tanaka, T. Noda, A. Kawasaki, and J. Kasahara,, "Experimental Investigation on a Rotating Detonation Cycle with Backflow of Burned Gas," Combustion and Flame, vol. 225, pp. 13-19, 2021.
[5]
L. Blain, "NASA tests rotary detonation engine: it will revolutionize space travel," NASA, 2023. [Online]. Available: https://www.aerospacengineering.net/nasa-tests-rotary-detonation-engine-it-will-revolutionize-space-travel/.
[6]
D. Ferguson and J. Gray, "Expanding the potential benefits of rotating detonation engines," Propulsion and Energy, 2021.
[7]
O. Ray , "NASA Validates Revolutionary Propulsion Design for Deep Space Missions," www.nasa.gov, 2023. [Online].
[8]
R. D. Smith and S. B. Stanley, "Experimental Investigation of Rotating Detonation Rocket Engines for Space Propulsion," PROPULSION AND POWER, vol. 37, no. 3, 2021.
[9]
L. S. Appalla, R. Joseph and V. R. Chari, "Investigations on Rotating Detonation Engines," in AIP Conference Proceedings, 2020
[10]
Q. Wang and Sh. Zhang, "Thrust characteristics research on continuous rotating detonation engine," Case Studies in Thermal Engineering, vol. 47, 2023.
[11]
M. Luan, Sh. Zhang, Zh. Xia, S. Yao  and J.-P. Wang, "Analytical and numerical study of the expansion effect on the velocity deficit of rotating detonation waves," Combustion Theory and Modelling, 2020.
[12]
J. Sun, J. Zhou, Sh. Liu and Zh. Lin, "Interaction between rotating detonation wave propagation and reactant," Acta Astronautica, vol. 164, pp. 197-203, 2019.
[13]
B. A. Rankin, M. L. Fotia, A. G. Naples, Ch. A. Stevens, and J. L. Hoke, "Overview of Performance, Application, and Analysis of Rotating Detonation Engine Technologies," Pressure Gain Combustion, vol. 33, 2017.
[14]
D. W. Zhai, N. B. Zhao, Sh. Jin, X. F. Shao, and H. T. Zheng, "Numerical study on the characteristics of rotating detonation wave with multicomponent mixtures," International Journal of Hydrogen Energy, vol. 48, no. 76, pp. 29786-29797, 2023.
[15]
"The world’s first space flight for the rotating detonation engine, and a glimpse at a new sample return capsule," ISAS, List, Research, Sounding Rockets, 2022.
[16]
C. A. Nordeen, D. Schwer, F. Schauer, J. Hoke, Th. Barber,  and B. Cetegen , "Thermodynamic model of a rotating detonation engine," Combustion, Explosion, and Shock Waves, vol. 50, p. 568–577, 2014.
[17]
D. Quick, "U.S. Navy investigates use of fuel-saving Rotating Detonation Engines," U.S. Naval Research Laboratory, 4555 Overlook Ave., SW Washington, DC 20375, 2012.
[18]
K. Kailasanath, "The Rotating-Detonation-Wave Engine Concept:A Brief Status Report," 49th AIAA Aerospace Sciences Meeting, AIAAPaper 2011-0580, 2011.
[19]
R. Yokoo, K. Goto, J. Kim, and A. Kawasaki, "Propulsion Performance of Cylindrical Rotating Detonation Engine," Special Section on Recent Progress on Rotating Detonation and Its Application(AIAAJ), vol. 58, 2020.
[20]
J. Shaw and et. al, "A Theoretical Review of Rotating Detonation Engines," in Direct Numerical Simulations - An Introduction and Applications, IntechOpen Limited, 2019.
[21]
J. Suchocki, Sh. T. Yu, J. Hoke, A. Naples, and F. Schauer, "Rotating Detonation Engine Operation," 50th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, 2012.
[22]
J. W. Bennewitz and et. al, "Experimental validation of rotating detonation for rocket propulsion," scientific reports 14204 , vol. 13, 2023.
[23]
P. Wolański,"Detonative Propulsio," Proceedings of the Combustion Institute, vol. 34, no. 1, p. 125–158, 2013.
[24]
F. A. Bykovskii, S. A. Zhdan, and E. F Vedernikov, "Continuous Spin Detonations," Journal of Propulsion and Power, vol. 22, no. 6, p. 1204–1216, 2006.
[25]
J. Kindracki, P., Wolanskiand, and Z. Gut, "Experimental Research on the Rotating Detonation in Gaseous Fuels–Oxygen Mixtures," Shock Waves, vol. 21, no. 2, p. 75–84, 2011.
[26]
D. E. Paxson, "Numerical Analysis of a Rotating Detonation Engine in the Relative Reference Frame," 52nd AIAA Aerospace Sciences Meeting, AIAA Paper 2014-0284, 2014.
[27]
D. A. Schwerand, and K. Kailasanath, "Physics of Heat-Release in Rotating Detonation Engines," 53rd AIAA Aerospace Sciences Meeting, AIAA Paper 2015-1602, 2015.
[28]
D. A. Schwer, and K. Kailasanath, "On Reducing Feedback Pressure inRotating Detonation Engines," 51st AIAA Aerospace Sciences Meeting,AIAA Paper 2013-1178, 2013.
[29]
D. A. chwer, and K. Kailasanath, "Feedback into Mixture Plenums in Rotating Detonation Engines," 50th AIAA Aerospace Sciences Meeting AIAA Paper 2012-0617, 2012.
[30]
T. H. Yi, , J. Lou, C. Turangan, J. Y. Choi, and P. Wolanski, "Propulsive Performance of a Continuously Rotating Detonation Engine," Journal of Propulsion and Power, vol. 27, no. 1, p. 171–181, 2011.
[31]
H. Nakayama, J. Kasahara, A. Matsuo, and I. Funaki, "Front Shock Behavior of Stable Curved Detonation Waves in Rectangular-Cross Section Curved Channels," Proceedings of the Combustion Institute, vol. 34, no. 2, p. 1939–1947, 2013.
[32]
C. S. Oldenstein, C. A. Almodóvar, J. B Jeffries, R. Hanson, and K. C. M. Brophy, “High-Bandwidth Scanned-Wavelength Modulation Spectroscopy Sensors for Temperature and H2O in a Rotating Detonation Engine," Measurement Science and Technology, Paper 105104., vol. 25, 2014.
[33]
M. L. Otia, F. Schauer, T. A. Kaemming, and J. Hoke, "Experimental Study of the Performance of a Rotating Detonation Engine with Nozzle," Journal of Propulsion and Power, vol. 32, no. 3, p. 674–681, 2016.
[34]
B. A. Rankin, M. L. Fotia, D. E. Paxson, J. L. Hoke and F. Schauer, "Experimental and Numerical Evaluation of Pressure Gain Combustion in a Rotating Detonation Engine," 53rd AIAA Aerospace Sciences Meeting, AIAA Paper 2015-0877, 2015.
[35]
A. Naples, J. Hoke, J. Karnesky, and F. Schauer, "Flowfield Characterization of a Rotating Detonation Engine," 51st AIAA Aerospace Sciences Meeting, AIAA Paper 2013-0278, 2013.
[36]
X. M. Tang, J. P. Wang, and Y. T. Shao, "Three-Dimensional Numerical Investigations of the Rotating Detonation Engine with aHollow Combustor," Combustion and Flame, vol. 162, no. 4, p. 997–1008, 2015.
[37]
N. Tsuboi, Y. Watanabe, T. Kojima, and A. K. Hayashi,  "Numerical Estimation of the Thrust Performance on a Rotating Detonation Engine for a Hydrogen–Oxygen Mixture," Proceedings of the Combustion Institute, vol. 35, no. 2, p. 2005–2013, 2015.
[38]
Z. Rui, and W. Jian-Ping, , "Numerical Investigation of Flow Particle Paths and Thermodynamic Performance of Continuously Rotating Detonation Engines," Combustion and Flame, vol. 159, no. 12, p. 3632–3645, 2012.
[39]
C. A. Nordeen, D. Schwer, F. Schauer, J. Hoke, and T. Barber, "Thermodynamic Model of a Rotating Detonation Engine," Combustion, Explosion, and Shock Waves, vol. 50, no. 5, p. 568–577, 2014.
[40]
K. Goto, J. Nishimura, A. Kawasaki, K. Matsuoka, J. Kasahara, A. Matsuo, I. Funaki, D. Nakata, M. Uchiumi, K. Higashino, "Experimental Propulsive Performance and Heating Environment of Rotating Detonation Engine with Various Throat Geometries," Journal of Propulsion and Power, vol. 35, no. 1, pp. 213-223, 2019.
[41]
X. Yuan , J. Zhou , X. Mi , and H. Dick Ng, "Numerical study of cellular detonation wave reflection over a cylindrical concave wedge," Combustion and Flame, vol. 202, pp. 179-194, 2019.
[42]
K. Miki, D. E. Paxson, D. Perkins, and S. Yungster, "RDE Nozzle Computational Design Methodology Development and Application," in AIAA Propulsion and Energy 2020 Forum, p. 3872, 2020.
[43]
I. A. Vaca, " Systematic Literature Review of Rotating Detonation Engines (RDE’s) & Potential Scalability for Use in Non-Rocket Based Applications," Master of Science in Aerospace Engineering,Department of Aerospace Engineering San José State University, San José State, 2023.
[44]
J. A. Boening, J.D. Heath, T.J. Byrd, J.V. Koch, A.T. Mattick, R. E. Breidenthal,C. Knowlen, and M. Kurosaka, "Design and Experiments of a Continuous Rotating Detonation Engine:a Spinning Wave Generator and Modulated Fuel/ Oxidizer Mixing," Abstract for AIAA Propulsion and Energy 2016, 2016.
[45]
A. Koch, Mit. Kurosaka, C. Knowlen, and J. Nathan Kutz, "Multiscale physics of rotating detonation waves: Autosolitons and modulational instabilities," Phys. Rev. E, vol. 104, no. 2, 2021.
[46]
A. Mendible, J. Koch, H. Lange, S. L. Brunton, and J. N. Kutz, "Data-driven modeling of rotating detonation waves," Phys. Rev. Fluids, vol. 6, 2021.
[47]
"https://www.imeche.org/news/news-article/rotating-detonation-engines-could-harness-%27violent%27-combustion-for-rocket-propulsion," 2020. [Online].
[48]
"https://www.aa.washington.edu/," https://www.aa.washington.edu/, 2018. [Online].
[49]
M. Jacobson, "Rotating detonation engine," aerospace manufacturing and design, 2020.
[50]
D. McKinney, "Navy Researchers Look to Rotating Detonation Engines to Power the Future," U.S. Naval Research Laboratory, 4555 Overlook Ave., SW Washington, DC 20375, 2012.
[51]
N. Kyle, "US Navy developing rotating detonation engine," Physics Today, doi:10.1063/PT.5.026505, 2012.
[52]
S. Sawada and et al., "Experimental Study of Torque Around the Axial Direction on Rotating Detonation Engines," Journal of Propulsion and Power, 2021.
[53]
D. Ozdemir, "Japan Tests Rotating Detonation Engine in Space for the First Time," Interesting Engineering, Inc., 2021.
[54]
K. Goto and et. al, "Thrust Validation of Rotating Detonation Engine System by Moving Rocket Sled-Test," Journal of Propulsion and Power, vol. 37, no. 3, pp. 419-425, 2021.
[55]
M. Yamaguchi, K. Matsuoka, A. Kawasaki, J. Kasahara, H. Watanabe, and A. Matsuo, “Investigation of combustion modes and pressure of reflective shuttling detonation combustor,” Proc. Combust. Inst., vol. 38, no. 3, pp. 3615–3622, 2021. DOI: 10.1016/j.proci.2020.07.064
[56]
"https://global.jaxa.jp/projects/rockets/s_rockets/topics.html," [Online].
[57]
S. Heister  and V. Tangirala, "Advances made toward rotating detonation engines," Propulsion and Energy, 2017. [Online]. Available: https://aerospaceamerica.aiaa.org/year-in-review/advances-made-toward-rotating-detonation-engines/.

  • تاریخ دریافت 04 اردیبهشت 1403
  • تاریخ بازنگری 14 مهر 1403
  • تاریخ پذیرش 28 اردیبهشت 1404