A
-
Acid-heat pretreatment
Study the Effect of Acid-heat Pretreatment of Nafion Membrane on the Performance of Multi-cell Stack of Vanadium Redox Flow Battery [Volume 2, Issue 1, 2022, Pages 64-72]
-
Active fault-tolerant control
Designing Active Fault-tolerant Controller for Spacecraft Under Actuator Fault [Volume 1, Issue 2, 2021, Pages 22-33]
-
Actuator Faults
Fault tolerant attitude control for a satellite with four reaction wheels [Volume 2, Issue 1, 2022, Pages 118-131]
-
Adhesion
Techniques for controlling the adhesion quality of anodized coatings after heating [Volume 2, Issue 1, 2022, Pages 51-63]
-
Aerodynamics
Aerodynamic Simulation of a Tactical Aerostat and evaluating the longitudinal static coefficients [Volume 2, Issue 1, 2022, Pages 73-83]
-
Aerostat
Aerodynamic Simulation of a Tactical Aerostat and evaluating the longitudinal static coefficients [Volume 2, Issue 1, 2022, Pages 73-83]
-
Alignment
Computing the installation error between star tracker and Fiber Optic Gyroscope [Volume 2, Issue 2, 2022, Pages 92-102]
-
Alumina
Effect of process parameters on microstructure and efficiency of tubular alumina catalyst prepared by doped anodizing method with platinum particles [Volume 2, Issue 1, 2022, Pages 109-117]
-
Alumina
Thermal conductivity enhancement of epoxy adhesives using Boron Nitride and Alumina ceramic fillers [Volume 2, Issue 2, 2022, Pages 103-114]
-
Anodizing
Techniques for controlling the adhesion quality of anodized coatings after heating [Volume 2, Issue 1, 2022, Pages 51-63]
-
Atomic oxygen corrosion
Investigation of atomic oxygen corrosion of satellite components coating under equivalent LEO orbit conditions [Volume 1, Issue 1, 2021, Pages 135-126]
-
Attitude and position dynamics
Time optimal control of spacecraft rotational and translational dynamics in orbital rendezvous maneuver [Volume 1, Issue 2, 2021, Pages 147-166]
-
Attitude determination
Imaged Based Earth Horizon Sensor with no Altitude Information [Volume 1, Issue 1, 2021, Pages 64-53]
-
Attitude determination
Computing the installation error between star tracker and Fiber Optic Gyroscope [Volume 2, Issue 2, 2022, Pages 92-102]
-
Augmentation
Design and Analysis of a Domestic Navigation Satellite Constellation for a Regional Coverage [Volume 2, Issue 2, 2022, Pages 135-148]
-
Austenitic stainless steel
Effect of brazing temperature on the microstructure and mechanical properties of stainless steel 316 joint brazed by BNi2 [Volume 1, Issue 2, 2021, Pages 1-9]
B
-
Backlighting Method
Experimental Study of Spray Merge in Dual Pressure-Swirl Coaxial Injectors [Volume 1, Issue 2, 2021, Pages 66-77]
-
Bang-Bang control structure
Time optimal control of spacecraft rotational and translational dynamics in orbital rendezvous maneuver [Volume 1, Issue 2, 2021, Pages 147-166]
-
Battery
Lifetime improvement using task scheduling in hard real-time systems equipped with environmental energy harvester and hybrid energy storage [Volume 1, Issue 1, 2021, Pages 24-13]
-
Battery Design
Investigation of Physical and Electrochemical Properties of Separator Used in High Drain Lithium-ion Battery [Volume 2, Issue 1, 2022, Pages 23-33]
-
Benchmark Examples
A review on benchmarks Examples for dynamical hybrid systems controller synthesis to facilitate its selection process [Volume 2, Issue 2, 2022, Pages 115-134]
-
BNi2
Effect of brazing temperature on the microstructure and mechanical properties of stainless steel 316 joint brazed by BNi2 [Volume 1, Issue 2, 2021, Pages 1-9]
-
Boron Nitride
Thermal conductivity enhancement of epoxy adhesives using Boron Nitride and Alumina ceramic fillers [Volume 2, Issue 2, 2022, Pages 103-114]
-
Brazing
Effect of brazing temperature on the microstructure and mechanical properties of stainless steel 316 joint brazed by BNi2 [Volume 1, Issue 2, 2021, Pages 1-9]
C
-
Calibration
Experimental Attitude Estimation Using Real-time Magnetometer Calibrated Data [Volume 1, Issue 2, 2021, Pages 78-87]
-
Calibration
Computing the installation error between star tracker and Fiber Optic Gyroscope [Volume 2, Issue 2, 2022, Pages 92-102]
-
Catalyst
Experimental Investigation of the Performance of a Monopropellant Hydrazine Thruster in Atmospheric Conditions [Volume 1, Issue 2, 2021, Pages 126-137]
-
Catalyst
Effect of process parameters on microstructure and efficiency of tubular alumina catalyst prepared by doped anodizing method with platinum particles [Volume 2, Issue 1, 2022, Pages 109-117]
-
Ceramic fillers
Thermal conductivity enhancement of epoxy adhesives using Boron Nitride and Alumina ceramic fillers [Volume 2, Issue 2, 2022, Pages 103-114]
-
CFD
Aerodynamic Simulation of a Tactical Aerostat and evaluating the longitudinal static coefficients [Volume 2, Issue 1, 2022, Pages 73-83]
-
Chromium Layer
Effect of Plasma Nitriding Treatment on the Chromium Layer applied on Space Construction to Avoid Cold Weld [Volume 1, Issue 1, 2021, Pages 35-25]
-
Cold Weld
Effect of Plasma Nitriding Treatment on the Chromium Layer applied on Space Construction to Avoid Cold Weld [Volume 1, Issue 1, 2021, Pages 35-25]
-
Collision force
Impact investigation between two unmanned satellites during Central Docking process [Volume 2, Issue 1, 2022, Pages 1-10]
-
Composite Separator
Investigation of Physical and Electrochemical Properties of Separator Used in High Drain Lithium-ion Battery [Volume 2, Issue 1, 2022, Pages 23-33]
-
Conceptual design
conceptual design of microwave electrothermal thruster of satellite [Volume 1, Issue 1, 2021, Pages 125-108]
-
Constellation Design
Investigating Orbital Configurations for a LEO Satellite Telephony Constellation over the Territory of Iran [Volume 1, Issue 2, 2021, Pages 138-146]
-
Coolant Pressure
Numerical Investigation of Coolant Flow Pressure Effect on the Water Jacket Design for Large Scale Diffuser at High Heat Fluxes [Volume 2, Issue 1, 2022, Pages 34-50]
-
Correlation
Multidisciplinary Design Sensitivity Analysis of a Spacecraft Monopropellant Propulsion system by Latin Hypercube Sampling (LHS) [Volume 2, Issue 2, 2022, Pages 1-21]
D
-
Diffraction Pattern
Design, and manufacture of digital sun sensor with an optimized slit over the entire field of view [Volume 2, Issue 1, 2022, Pages 147-153]
-
Discrete-event Systems
A review on benchmarks Examples for dynamical hybrid systems controller synthesis to facilitate its selection process [Volume 2, Issue 2, 2022, Pages 115-134]
-
Distributed Missions
Statistical Study of Satellite Constellations and the Cubesat Role [(Articles in Press)]
-
Dual Pressure-Swirl Coaxial Injector
Experimental Study of Spray Merge in Dual Pressure-Swirl Coaxial Injectors [Volume 1, Issue 2, 2021, Pages 66-77]
-
Dynamic simulation
Impact investigation between two unmanned satellites during Central Docking process [Volume 2, Issue 1, 2022, Pages 1-10]
-
Dynamics of satellite structure"
Optimum Design of a microsatellite structure with vibration constraint [Volume 1, Issue 1, 2021, Pages 80-65]
E
-
Electrostatic discharge
Analysis and Simulation of Space Charge Effects on satellite surfaces and multi-layer insulation [Volume 2, Issue 2, 2022, Pages 22-36]
-
Energy harvesting
Lifetime improvement using task scheduling in hard real-time systems equipped with environmental energy harvester and hybrid energy storage [Volume 1, Issue 1, 2021, Pages 24-13]
-
Environmental Disturbances
Improving the Method of Satellite Station Keeping in Geostationary Orbit with Considerations of fuel Consumption Restrictions [Volume 1, Issue 2, 2021, Pages 49-65]
-
Epoxy adhesive
Thermal conductivity enhancement of epoxy adhesives using Boron Nitride and Alumina ceramic fillers [Volume 2, Issue 2, 2022, Pages 103-114]
-
Exhaust Diffuser
Numerical Investigation of Coolant Flow Pressure Effect on the Water Jacket Design for Large Scale Diffuser at High Heat Fluxes [Volume 2, Issue 1, 2022, Pages 34-50]
-
Experimental data
Improvement the leaf water content inventory model based on the hyper spectral data [Volume 1, Issue 2, 2021, Pages 10-21]
F
-
Fault Tolerant Control
Fault tolerant attitude control for a satellite with four reaction wheels [Volume 2, Issue 1, 2022, Pages 118-131]
-
Filler Metal
Effect of brazing temperature on the microstructure and mechanical properties of stainless steel 316 joint brazed by BNi2 [Volume 1, Issue 2, 2021, Pages 1-9]
-
Fluid layer
Design and Analysis of Pressure-Swirl Fuel Injector with Full-Cone Spray for Catalytic Thruster [Volume 1, Issue 2, 2021, Pages 97-111]
-
FMEA
potential failure modes and effects analysis in the reaction wheel actuator and operational elimination of their effects [Volume 1, Issue 2, 2021, Pages 112-125]
-
Forest density
Investigation the effect of the forest height and forest density on the accuracy of forest height estimation methods using PolInSAR data [Volume 2, Issue 1, 2022, Pages 132-147]
-
Forest height
Investigation the effect of the forest height and forest density on the accuracy of forest height estimation methods using PolInSAR data [Volume 2, Issue 1, 2022, Pages 132-147]
-
Forest Products Laboratory
Techniques for controlling the adhesion quality of anodized coatings after heating [Volume 2, Issue 1, 2022, Pages 51-63]
-
Fuzzy logic
Improving the Method of Satellite Station Keeping in Geostationary Orbit with Considerations of fuel Consumption Restrictions [Volume 1, Issue 2, 2021, Pages 49-65]
G
-
Genetic Algorithm
Optimum Design of a microsatellite structure with vibration constraint [Volume 1, Issue 1, 2021, Pages 80-65]
-
Genetic Algorithm
Two-objective structural optimization of space capsule with thin-walled cylindrical approximation [Volume 2, Issue 2, 2022, Pages 158-170]
-
Geostationary orbit
Improving the Method of Satellite Station Keeping in Geostationary Orbit with Considerations of fuel Consumption Restrictions [Volume 1, Issue 2, 2021, Pages 49-65]
-
Glass-epoxy composite
Experimental and Numerical Analysis of the Effect of Filament Curvature Pattern on the Internal Hydrostatic Threshold of GFRP Composite Cylinder Made by Filament Winding Process [Volume 2, Issue 2, 2022, Pages 60-77]
-
Global Navigation Satellite System
Design and Analysis of a Domestic Navigation Satellite Constellation for a Regional Coverage [Volume 2, Issue 2, 2022, Pages 135-148]
H
-
Hall thruster
Simulation of Hollow Cathode in the Hall Thruster by Particle in Cell (PIC) Method [Volume 2, Issue 2, 2022, Pages 37-47]
-
Hardware in the loop
Experimental Attitude Estimation Using Real-time Magnetometer Calibrated Data [Volume 1, Issue 2, 2021, Pages 78-87]
-
High Altitude Test Facility
Experimental Study of the pre-evacuation effect on second throat diffuser Starting process [Volume 1, Issue 2, 2021, Pages 167-179]
-
High Drain Battery
Investigation of Physical and Electrochemical Properties of Separator Used in High Drain Lithium-ion Battery [Volume 2, Issue 1, 2022, Pages 23-33]
-
High gain antenna
Wideband Microstrip Patch Array Antenna for Synthetic Aperture Radar Applications [Volume 2, Issue 1, 2022, Pages 11-22]
-
High Heat Flux
Numerical Investigation of Coolant Flow Pressure Effect on the Water Jacket Design for Large Scale Diffuser at High Heat Fluxes [Volume 2, Issue 1, 2022, Pages 34-50]
-
High Power Battery
Investigation of Physical and Electrochemical Properties of Separator Used in High Drain Lithium-ion Battery [Volume 2, Issue 1, 2022, Pages 23-33]
-
High throughput satellite
Approaches to overcome challenges and technology bottlenecks of geostationary orbit high throughput satellite payload antenna [(Articles in Press)]
-
Hollow cathode
Simulation of Hollow Cathode in the Hall Thruster by Particle in Cell (PIC) Method [Volume 2, Issue 2, 2022, Pages 37-47]
-
Hybrid control
A review on benchmarks Examples for dynamical hybrid systems controller synthesis to facilitate its selection process [Volume 2, Issue 2, 2022, Pages 115-134]
-
Hybrid Dynamical Systems
A review on benchmarks Examples for dynamical hybrid systems controller synthesis to facilitate its selection process [Volume 2, Issue 2, 2022, Pages 115-134]
-
Hydrazine
Experimental Investigation of the Performance of a Monopropellant Hydrazine Thruster in Atmospheric Conditions [Volume 1, Issue 2, 2021, Pages 126-137]
-
Hydrazine
Pulse-mode Performance Evaluation of a Monopropellant Hydrazine Thruster [(Articles in Press)]
-
Hydrostatic pressure
Experimental and Numerical Analysis of the Effect of Filament Curvature Pattern on the Internal Hydrostatic Threshold of GFRP Composite Cylinder Made by Filament Winding Process [Volume 2, Issue 2, 2022, Pages 60-77]
-
Hyperspectral images
Improvement the leaf water content inventory model based on the hyper spectral data [Volume 1, Issue 2, 2021, Pages 10-21]
-
Hyrazine dissociation
Study the Performance of Hydrazine Monopropellant Thruster Catalysts with Different Iridium Loading [Volume 2, Issue 1, 2022, Pages 96-108]
I
-
Injector internal geometry
Design and Analysis of Pressure-Swirl Fuel Injector with Full-Cone Spray for Catalytic Thruster [Volume 1, Issue 2, 2021, Pages 97-111]
-
Interleaved sub-arrays
Approaches to overcome challenges and technology bottlenecks of geostationary orbit high throughput satellite payload antenna [(Articles in Press)]
-
Internal ballistics
Numerical evaluation of a test bed of an orbital transmission engine in an initial vacuum condition [Volume 2, Issue 2, 2022, Pages 78-91]
-
Iridium Nanoparticles
Study the Performance of Hydrazine Monopropellant Thruster Catalysts with Different Iridium Loading [Volume 2, Issue 1, 2022, Pages 96-108]
L
-
Leaf water content
Improvement the leaf water content inventory model based on the hyper spectral data [Volume 1, Issue 2, 2021, Pages 10-21]
-
LEO Orbit
Investigation of atomic oxygen corrosion of satellite components coating under equivalent LEO orbit conditions [Volume 1, Issue 1, 2021, Pages 135-126]
-
LEO Satellite Constellation
Design of a Low Earth Orbit Constellation for Regional Navigation Mission [Volume 2, Issue 2, 2022, Pages 48-59]
-
Lifetime
Lifetime enhancement of embedded systems during task scheduling through a multi-objective particle swarm optimization approach [Volume 1, Issue 1, 2021, Pages 107-92]
-
Lithium-ion battery
Investigation of Physical and Electrochemical Properties of Separator Used in High Drain Lithium-ion Battery [Volume 2, Issue 1, 2022, Pages 23-33]
-
LTA
Aerodynamic Simulation of a Tactical Aerostat and evaluating the longitudinal static coefficients [Volume 2, Issue 1, 2022, Pages 73-83]
M
-
Magnetometer
Experimental Attitude Estimation Using Real-time Magnetometer Calibrated Data [Volume 1, Issue 2, 2021, Pages 78-87]
-
Membrane
Study the Effect of Acid-heat Pretreatment of Nafion Membrane on the Performance of Multi-cell Stack of Vanadium Redox Flow Battery [Volume 2, Issue 1, 2022, Pages 64-72]
-
Merge Performance Map
Experimental Study of Spray Merge in Dual Pressure-Swirl Coaxial Injectors [Volume 1, Issue 2, 2021, Pages 66-77]
-
Metal forming
Investigating the Effect of Equiaxed and Lamellar Microstructure on Critical Damage of Ti-6Al-4V in Isothermal Compression of Grooved Double-Cone Specimens [Volume 1, Issue 1, 2021, Pages 91-81]
-
Microstrip Patch Antenna
Wideband Microstrip Patch Array Antenna for Synthetic Aperture Radar Applications [Volume 2, Issue 1, 2022, Pages 11-22]
-
Middle East Coverage
Design of a Low Earth Orbit Constellation for Regional Navigation Mission [Volume 2, Issue 2, 2022, Pages 48-59]
-
Model predictive Control
Satellite Attitude Control Design via Tube-based Robust Model Predictive Control based on Reduced Calculation [Volume 2, Issue 1, 2022, Pages 84-95]
-
Monitoring Systems
Toward the Establishment of a National Center for Space Weather Services: Vision, Mission and Organization [Volume 1, Issue 2, 2021, Pages 34-48]
-
Monoproellant thruster
Study the Performance of Hydrazine Monopropellant Thruster Catalysts with Different Iridium Loading [Volume 2, Issue 1, 2022, Pages 96-108]
-
Monopropellant
Experimental Investigation of the Performance of a Monopropellant Hydrazine Thruster in Atmospheric Conditions [Volume 1, Issue 2, 2021, Pages 126-137]
-
Monopropellant
Pulse-mode Performance Evaluation of a Monopropellant Hydrazine Thruster [(Articles in Press)]
-
Monopropellant thruster
Design and Analysis of Pressure-Swirl Fuel Injector with Full-Cone Spray for Catalytic Thruster [Volume 1, Issue 2, 2021, Pages 97-111]
-
Multi-cell stack
Study the Effect of Acid-heat Pretreatment of Nafion Membrane on the Performance of Multi-cell Stack of Vanadium Redox Flow Battery [Volume 2, Issue 1, 2022, Pages 64-72]
-
Multidisciplinary design Sensitivity Analysis
Multidisciplinary Design Sensitivity Analysis of a Spacecraft Monopropellant Propulsion system by Latin Hypercube Sampling (LHS) [Volume 2, Issue 2, 2022, Pages 1-21]
-
Multi-layer insulation
Analysis and Simulation of Space Charge Effects on satellite surfaces and multi-layer insulation [Volume 2, Issue 2, 2022, Pages 22-36]
-
Multi-Objective Optimization
Lifetime enhancement of embedded systems during task scheduling through a multi-objective particle swarm optimization approach [Volume 1, Issue 1, 2021, Pages 107-92]
-
Multiple beam antenna
Approaches to overcome challenges and technology bottlenecks of geostationary orbit high throughput satellite payload antenna [(Articles in Press)]
-
Multiprocessor embedded systems
Lifetime enhancement of embedded systems during task scheduling through a multi-objective particle swarm optimization approach [Volume 1, Issue 1, 2021, Pages 107-92]
N
-
Nafion
Study the Effect of Acid-heat Pretreatment of Nafion Membrane on the Performance of Multi-cell Stack of Vanadium Redox Flow Battery [Volume 2, Issue 1, 2022, Pages 64-72]
-
Nano Particle
Investigation of the Use of Modified Molybdenum Disulfide Nanostrucutres in the Rheological Behavior of Microparticulate Filled Suspensions [Volume 1, Issue 2, 2021, Pages 88-96]
-
National Center
Toward the Establishment of a National Center for Space Weather Services: Vision, Mission and Organization [Volume 1, Issue 2, 2021, Pages 34-48]
-
Navigation Accuracy
Design and Analysis of a Domestic Navigation Satellite Constellation for a Regional Coverage [Volume 2, Issue 2, 2022, Pages 135-148]
-
Neural Network Failure diagnostic
Reliability Assessment of Power Electronic Converters Using Replicator Neural Networks [(Articles in Press)]
-
Nitride Chromium
Effect of Plasma Nitriding Treatment on the Chromium Layer applied on Space Construction to Avoid Cold Weld [Volume 1, Issue 1, 2021, Pages 35-25]
O
-
Onboard Software
Lessons Learned and Achievements in Pars1 Satellite Onboard Software Development and Test [Volume 2, Issue 2, 2022, Pages 149-157]
-
Optical Simulation
Design, and manufacture of digital sun sensor with an optimized slit over the entire field of view [Volume 2, Issue 1, 2022, Pages 147-153]
-
Optimization"
Optimum Design of a microsatellite structure with vibration constraint [Volume 1, Issue 1, 2021, Pages 80-65]
-
Orbit
Design and Analysis of a Domestic Navigation Satellite Constellation for a Regional Coverage [Volume 2, Issue 2, 2022, Pages 135-148]
-
Orbital design
Investigating Orbital Configurations for a LEO Satellite Telephony Constellation over the Territory of Iran [Volume 1, Issue 2, 2021, Pages 138-146]
-
Orbital maneuver
System design of resistojet thruster for space application [Volume 1, Issue 1, 2021, Pages 52-36]
-
Orbital rendezvous maneuver
Time optimal control of spacecraft rotational and translational dynamics in orbital rendezvous maneuver [Volume 1, Issue 2, 2021, Pages 147-166]
P
-
Particle Swarm Optimization
Lifetime enhancement of embedded systems during task scheduling through a multi-objective particle swarm optimization approach [Volume 1, Issue 1, 2021, Pages 107-92]
-
Phased array antenna
Approaches to overcome challenges and technology bottlenecks of geostationary orbit high throughput satellite payload antenna [(Articles in Press)]
-
PIC simulation
Simulation of Hollow Cathode in the Hall Thruster by Particle in Cell (PIC) Method [Volume 2, Issue 2, 2022, Pages 37-47]
-
Piezoelectric Sensor
Experimental identification of satellite antenna dynamics [Volume 1, Issue 1, 2021, Pages 12-1]
-
PolInSAR technique
Investigation the effect of the forest height and forest density on the accuracy of forest height estimation methods using PolInSAR data [Volume 2, Issue 1, 2022, Pages 132-147]
-
Power Consumption
Lifetime enhancement of embedded systems during task scheduling through a multi-objective particle swarm optimization approach [Volume 1, Issue 1, 2021, Pages 107-92]
-
Pre-evacuation
Experimental Study of the pre-evacuation effect on second throat diffuser Starting process [Volume 1, Issue 2, 2021, Pages 167-179]
-
Pressure-Swirl Injector
Design and Analysis of Pressure-Swirl Fuel Injector with Full-Cone Spray for Catalytic Thruster [Volume 1, Issue 2, 2021, Pages 97-111]
-
Probe-cone
Impact investigation between two unmanned satellites during Central Docking process [Volume 2, Issue 1, 2022, Pages 1-10]
-
Pseudospectral method
Time optimal control of spacecraft rotational and translational dynamics in orbital rendezvous maneuver [Volume 1, Issue 2, 2021, Pages 147-166]
-
Pulse Mode
Pulse-mode Performance Evaluation of a Monopropellant Hydrazine Thruster [(Articles in Press)]
R
-
Reaction wheel
potential failure modes and effects analysis in the reaction wheel actuator and operational elimination of their effects [Volume 1, Issue 2, 2021, Pages 112-125]
-
Real-time
Experimental Attitude Estimation Using Real-time Magnetometer Calibrated Data [Volume 1, Issue 2, 2021, Pages 78-87]
-
Reduced Calculation of Approximate mRPI
Satellite Attitude Control Design via Tube-based Robust Model Predictive Control based on Reduced Calculation [Volume 2, Issue 1, 2022, Pages 84-95]
-
Reliability
potential failure modes and effects analysis in the reaction wheel actuator and operational elimination of their effects [Volume 1, Issue 2, 2021, Pages 112-125]
-
Remaining useful lifetime estimation
Reliability Assessment of Power Electronic Converters Using Replicator Neural Networks [(Articles in Press)]
-
Remote Sensing
Improvement the leaf water content inventory model based on the hyper spectral data [Volume 1, Issue 2, 2021, Pages 10-21]
-
Results
Lessons Learned and Achievements in Pars1 Satellite Onboard Software Development and Test [Volume 2, Issue 2, 2022, Pages 149-157]
-
Rheology
Investigation of the Use of Modified Molybdenum Disulfide Nanostrucutres in the Rheological Behavior of Microparticulate Filled Suspensions [Volume 1, Issue 2, 2021, Pages 88-96]
-
Robust Control
Satellite Attitude Control Design via Tube-based Robust Model Predictive Control based on Reduced Calculation [Volume 2, Issue 1, 2022, Pages 84-95]
S
-
Sandblasting
Techniques for controlling the adhesion quality of anodized coatings after heating [Volume 2, Issue 1, 2022, Pages 51-63]
-
Satellite Antenna
Experimental identification of satellite antenna dynamics [Volume 1, Issue 1, 2021, Pages 12-1]
-
Satellite attitude control
Fault tolerant attitude control for a satellite with four reaction wheels [Volume 2, Issue 1, 2022, Pages 118-131]
-
Satellite Attitude Control System
Satellite Attitude Control Design via Tube-based Robust Model Predictive Control based on Reduced Calculation [Volume 2, Issue 1, 2022, Pages 84-95]
-
Satellite Configuration
Statistical Study of Satellite Constellations and the Cubesat Role [(Articles in Press)]
-
Satellite Constellation
Statistical Study of Satellite Constellations and the Cubesat Role [(Articles in Press)]
-
Satellite docking
Impact investigation between two unmanned satellites during Central Docking process [Volume 2, Issue 1, 2022, Pages 1-10]
-
Satellite Telephony
Investigating Orbital Configurations for a LEO Satellite Telephony Constellation over the Territory of Iran [Volume 1, Issue 2, 2021, Pages 138-146]
-
Satellite vibrations"
Optimum Design of a microsatellite structure with vibration constraint [Volume 1, Issue 1, 2021, Pages 80-65]
-
Semiconductor devices
Reliability Assessment of Power Electronic Converters Using Replicator Neural Networks [(Articles in Press)]
-
Sensitivity
Multidisciplinary Design Sensitivity Analysis of a Spacecraft Monopropellant Propulsion system by Latin Hypercube Sampling (LHS) [Volume 2, Issue 2, 2022, Pages 1-21]
-
Sensitivity analysis
Two-objective structural optimization of space capsule with thin-walled cylindrical approximation [Volume 2, Issue 2, 2022, Pages 158-170]
-
Solar Storms
Toward the Establishment of a National Center for Space Weather Services: Vision, Mission and Organization [Volume 1, Issue 2, 2021, Pages 34-48]
-
Space capsule shell
Two-objective structural optimization of space capsule with thin-walled cylindrical approximation [Volume 2, Issue 2, 2022, Pages 158-170]
-
Space Construction
Effect of Plasma Nitriding Treatment on the Chromium Layer applied on Space Construction to Avoid Cold Weld [Volume 1, Issue 1, 2021, Pages 35-25]
-
Spacecraft
Designing Active Fault-tolerant Controller for Spacecraft Under Actuator Fault [Volume 1, Issue 2, 2021, Pages 22-33]
-
Spacecraft Liquid monopropellant propulsion system
Multidisciplinary Design Sensitivity Analysis of a Spacecraft Monopropellant Propulsion system by Latin Hypercube Sampling (LHS) [Volume 2, Issue 2, 2022, Pages 1-21]
-
Space Propulsion
conceptual design of microwave electrothermal thruster of satellite [Volume 1, Issue 1, 2021, Pages 125-108]
-
Space Radiation
Toward the Establishment of a National Center for Space Weather Services: Vision, Mission and Organization [Volume 1, Issue 2, 2021, Pages 34-48]
-
Space Weather Events
Toward the Establishment of a National Center for Space Weather Services: Vision, Mission and Organization [Volume 1, Issue 2, 2021, Pages 34-48]
-
Spectral curve
Improvement the leaf water content inventory model based on the hyper spectral data [Volume 1, Issue 2, 2021, Pages 10-21]
-
Spiral thread
Experimental and Numerical Analysis of the Effect of Filament Curvature Pattern on the Internal Hydrostatic Threshold of GFRP Composite Cylinder Made by Filament Winding Process [Volume 2, Issue 2, 2022, Pages 60-77]
-
Spray cone
Design and Analysis of Pressure-Swirl Fuel Injector with Full-Cone Spray for Catalytic Thruster [Volume 1, Issue 2, 2021, Pages 97-111]
-
Stabilization
Designing Active Fault-tolerant Controller for Spacecraft Under Actuator Fault [Volume 1, Issue 2, 2021, Pages 22-33]
-
Star tracker
Computing the installation error between star tracker and Fiber Optic Gyroscope [Volume 2, Issue 2, 2022, Pages 92-102]
-
Static Earth Horizon Sensor
Imaged Based Earth Horizon Sensor with no Altitude Information [Volume 1, Issue 1, 2021, Pages 64-53]
-
Static electricity
Analysis and Simulation of Space Charge Effects on satellite surfaces and multi-layer insulation [Volume 2, Issue 2, 2022, Pages 22-36]
-
Station Keeping maneuver
Improving the Method of Satellite Station Keeping in Geostationary Orbit with Considerations of fuel Consumption Restrictions [Volume 1, Issue 2, 2021, Pages 49-65]
-
Sub-beam
Approaches to overcome challenges and technology bottlenecks of geostationary orbit high throughput satellite payload antenna [(Articles in Press)]
-
Sun sensor
Design, and manufacture of digital sun sensor with an optimized slit over the entire field of view [Volume 2, Issue 1, 2022, Pages 147-153]
-
Supervised modelling
Improvement the leaf water content inventory model based on the hyper spectral data [Volume 1, Issue 2, 2021, Pages 10-21]
-
Synthetic Aperture Radar
Wideband Microstrip Patch Array Antenna for Synthetic Aperture Radar Applications [Volume 2, Issue 1, 2022, Pages 11-22]
T
-
Task scheduling and mapping
Lifetime enhancement of embedded systems during task scheduling through a multi-objective particle swarm optimization approach [Volume 1, Issue 1, 2021, Pages 107-92]
-
Test
Lessons Learned and Achievements in Pars1 Satellite Onboard Software Development and Test [Volume 2, Issue 2, 2022, Pages 149-157]
-
Thermal conductivity
Thermal conductivity enhancement of epoxy adhesives using Boron Nitride and Alumina ceramic fillers [Volume 2, Issue 2, 2022, Pages 103-114]
-
Thermal Diffusivity
Thermal conductivity enhancement of epoxy adhesives using Boron Nitride and Alumina ceramic fillers [Volume 2, Issue 2, 2022, Pages 103-114]
-
Thruster
Experimental Investigation of the Performance of a Monopropellant Hydrazine Thruster in Atmospheric Conditions [Volume 1, Issue 2, 2021, Pages 126-137]
-
Thruster
Pulse-mode Performance Evaluation of a Monopropellant Hydrazine Thruster [(Articles in Press)]
-
Ti-6Al-4V
Investigating the Effect of Equiaxed and Lamellar Microstructure on Critical Damage of Ti-6Al-4V in Isothermal Compression of Grooved Double-Cone Specimens [Volume 1, Issue 1, 2021, Pages 91-81]
-
Time optimal control
Time optimal control of spacecraft rotational and translational dynamics in orbital rendezvous maneuver [Volume 1, Issue 2, 2021, Pages 147-166]
-
Titanium
Effect of Plasma Nitriding Treatment on the Chromium Layer applied on Space Construction to Avoid Cold Weld [Volume 1, Issue 1, 2021, Pages 35-25]
-
Tube-Base MPC
Satellite Attitude Control Design via Tube-based Robust Model Predictive Control based on Reduced Calculation [Volume 2, Issue 1, 2022, Pages 84-95]
-
Two-objective optimization
Two-objective structural optimization of space capsule with thin-walled cylindrical approximation [Volume 2, Issue 2, 2022, Pages 158-170]
U
-
Unsteady flow
Numerical evaluation of a test bed of an orbital transmission engine in an initial vacuum condition [Volume 2, Issue 2, 2022, Pages 78-91]
V
-
Vanadium redox flow battery
Study the Effect of Acid-heat Pretreatment of Nafion Membrane on the Performance of Multi-cell Stack of Vanadium Redox Flow Battery [Volume 2, Issue 1, 2022, Pages 64-72]
-
Vibration Frequency
Experimental identification of satellite antenna dynamics [Volume 1, Issue 1, 2021, Pages 12-1]
-
Viscosity
Investigation of the Use of Modified Molybdenum Disulfide Nanostrucutres in the Rheological Behavior of Microparticulate Filled Suspensions [Volume 1, Issue 2, 2021, Pages 88-96]
W
-
Walker Delta Constellation
Investigating Orbital Configurations for a LEO Satellite Telephony Constellation over the Territory of Iran [Volume 1, Issue 2, 2021, Pages 138-146]
-
Water Jacket Cooling
Numerical Investigation of Coolant Flow Pressure Effect on the Water Jacket Design for Large Scale Diffuser at High Heat Fluxes [Volume 2, Issue 1, 2022, Pages 34-50]
-
Weight percentage
Study the Performance of Hydrazine Monopropellant Thruster Catalysts with Different Iridium Loading [Volume 2, Issue 1, 2022, Pages 96-108]
-
Wideband antenna
Wideband Microstrip Patch Array Antenna for Synthetic Aperture Radar Applications [Volume 2, Issue 1, 2022, Pages 11-22]