mohamad ali amirifar; alireza rajabi; nooredin ghadiri masoom; Zahra Amirsardari
Abstract
In this study, the pulse mode performance of a monopropellant hydrazine thruster has been studied. For this purpose, a laboratory sample of a monopropellant hydrazine thruster under atmospheric pressure was fabricated and tested. The thruster catalyst is natively synthesized. The pulse mode performance ...
Read More
In this study, the pulse mode performance of a monopropellant hydrazine thruster has been studied. For this purpose, a laboratory sample of a monopropellant hydrazine thruster under atmospheric pressure was fabricated and tested. The thruster catalyst is natively synthesized. The pulse mode performance of this monopropellant hydrazine thruster has been experimentally evaluated and the results are presented. The results of this study show that the monopropellant hydrazine thruster made with a synthesized catalyst produces reproducible impulses for pulses less than 10 milliseconds wide. The minimum impulse of this monopropellant hydrazine thruster is measured at 32 mNS. Also, the standard deviation of the impulse is less than 6% for 100 pulses. The thruster response time is also very reproducible. The results of this study showed that the centroid of the thruster changes linearly with the pulse width. However, the transient behavior of the chamber pressure is relatively slow, leading to a large centroid.
Propulsion
Nooredin Ghadiri Massoom; alireza rajabi; mohamad ali amirifar; Zahra Amirsardari; Akram Dourani; majid kamranifar
Abstract
In this paper, the effects of different weight percentage of iridium (Ir) nanoparticles loadings on performance parameters of hydrazine catalyst and monopropellant thruster have been studied. Nanoparticles of iridium with different contents of 10 wt%, 20 wt%, and 30 wt% has been coated on gamma-alumina ...
Read More
In this paper, the effects of different weight percentage of iridium (Ir) nanoparticles loadings on performance parameters of hydrazine catalyst and monopropellant thruster have been studied. Nanoparticles of iridium with different contents of 10 wt%, 20 wt%, and 30 wt% has been coated on gamma-alumina of 1 to 2 mm size for decomposition of hydrazine during some various steps of calcination. These catalysts then have been tested in a 1 N thruster. The tests were conducted with a scenario of different stages of steady and pulsating fires of different times and duty cycles. Test results showed that catalyst loss was minimum with 30 wt% of iridium nanoparticles loading. Despite of this, there were no meaningful difference between other parameters such as pressure roughness, thrust, specific impulse, and catalyst crushing. The results showed a good value of characteristic velocity. All parameter values of three type of catalysts were within desired range.
Propulsion
mohamad ali amirifar; alireza rajabi; nooredin ghadiri masoom; zahra amirsardari; majid kamranifar
Abstract
In this research, the performance of a monopropellant hydrazine thruster in atmospheric conditions has been investigated experimentally. For this purpose, after designing and constructing the thruster according to the functional requirements of the thruster, a test was designed and after that, the desired ...
Read More
In this research, the performance of a monopropellant hydrazine thruster in atmospheric conditions has been investigated experimentally. For this purpose, after designing and constructing the thruster according to the functional requirements of the thruster, a test was designed and after that, the desired thruster was tested in atmospheric conditions. The test results show that the tested thruster can generate 2000 pulses with a width of 0.5 seconds and a periodicity of one second with reproducibility. It was shown that the life of this thruster is more than 2000 pulses and the thruster was able to produce very small beats of 3 mNS in reproducibility. Also, comparing the results of the current thruster sample with the experimental results of other thrusters showed how by selecting the appropriate dimensions for the injector, catalyst chamber and nozzle, the characteristics of pressure rise time, minimum impulse, pulse centroid and pressure drop time in the Thruster can be well controlled. Reducing the injector diameter (by keeping the flow rate constant by increasing the injection pressure) reduces the impulse (within a constant pulse width) and increases the pressure rise time. Reducing the dimensions of the catalyst chamber also reduces the increase and decrease time of the pressure, resulting in a smaller pulse centroid.