@article { author = {RASTGAR, ALI and Ghasemi, Hojat}, title = {Experimental Study of Spray Merge in Dual Pressure- Swirl Coaxial Injectors}, journal = {Space Science, Technology and Applications}, volume = {1}, number = {2}, pages = {66-77}, year = {2022}, publisher = {Iranian Space Research Institute}, issn = {2783-4557}, eissn = {2783-4557}, doi = {10.22034/jssta.2022.312087.1036}, abstract = {The purpose of this paper is to present experimental data for merging two outlet fluid skirts in a dual pressure- swirl coaxial injector. In this study, a dual pressure- swirl external mixing injector was designed and fabricated. Operational characteristics including discharge coefficient and breakup length were expressed in terms of different injection pressures for internal and external injectors. Utilizing fast shooting, based on the backlighting method, the interaction between of two outlet skirts were investigated and the merge performance map was extracted. The merge performance map results indicated, when the pressure difference of the external injector increases from 0.3 bar to 0.95 bar, the pressure difference of the internal injector for the merge to occur increases. The reason for this increase in this range of external injector injection pressure differences is that, the effect of the internal injector injection pressure for merge in this area is greater than the external injector injection pressure, the external injector skirt is pulled toward the internal injector skirt. For injection pressures difference of more than 0.95 bar in the external injector, because the effect of the external injector injection pressure for merge is greater than the internal injector injection pressure, the internal injector injection pressure difference is reduced for the merge to occur and the internal injector skirt is pulled toward the external injector skirt.}, keywords = {Experimental data# Hyperspectral images# Leaf water content# Remote sensing# Spectral curve# Supervised modelling}, title_fa = {مطالعه تجربی ادغام اسپری در انژکتورهای هم‌محور دوگانه فشاری- چرخشی}, abstract_fa = {هدف از مقاله حاضر ارائه یافته‌های تجربی مربوط به شرایط لازم برای ادغام دو دامن سیال خروجی از انژکتور داخلی و خارجی در یک انژکتور هم‌محور دوگانه فشاری- چرخشی است. در این پژوهش یک انژکتور دوگانه فشاری- چرخشی اختلاط در خارج طراحی و ساخته شده است. مشخصه‌های عملکردی شامل ضریب تخلیه و طول شکست بر حسب اختلاف فشارهای تزریق مختلف برای انژکتورهای داخلی و خارجی بیان شده است. با استفاده از روش عکس‌برداری سریع و روش نوردهی پس‌زمینه به بررسی تعامل بین دو دامن سیال خروجی از انژکتور پرداخته شده و نقشه عملکرد ادغام دو دامن سیال خروجی از انژکتور استخراج شده است. از نقشه عملکرد نتیجه گرفته می‌شود، هنگامی که اختلاف فشار تزریق انژکتور خارجی از 3/0 تا 95/0 بار زیاد می‌شود، اختلاف فشار انژکتور داخلی برای وقوع ادغام نیز افزایش می‌یابد. علت این افزایش در این محدوده از اختلاف فشار تزریق انژکتور خارجی این است که تأثیر فشار تزریق انژکتور داخلی برای ادغام، بیشتر از تأثیر فشار تزریق انژکتور خارجی است و دامن انژکتور خارجی به سمت دامن انژکتور داخلی کشیده می‌شود. برای اختلاف فشارهای تزریق بیش از 95/0 بار در انژکتور خارجی، به دلیل این‌که تأثیر فشار تزریق انژکتور خارجی برای ادغام بیشتر از تأثیر فشار تزریق انژکتور داخلی است، اختلاف فشار تزریق انژکتور داخلی برای وقوع ادغام کاهش می‌یابد و دامن انژکتور داخلی به سمت دامن انژکتور خارجی کشیده می‌شود}, keywords_fa = {انژکتور هم‌محور دوگانه فشاری,چرخشی# روش پس‌زمینه# نقشه عملکرد ادغام}, url = {https://journal.isrc.ac.ir/article_146833.html}, eprint = {https://journal.isrc.ac.ir/article_146833_0fc6d7e1d139a78b9ab41353b4962122.pdf} }